Which rear end do I have??
Question:
A complete list of all GM RPO codes can be found at http://tinyurl.com/eycv GT4 Axle Rear 3.73 Ratio GT5 Axle Rear 4.10 Ratio (DUP With GT8) GU4 Axle Rear 3.08 Ratio G65 Level Control Manual, Self-Adjusting G69 Level Control Auto, Air, HD G80 Axle Positraction Limited Slip HMc
Response:
Thanks for info and the link, kind of was hoping I had the 3.73 axle ratio. may be a long shot but would anyone know the difference in fuel economy between the two axle ratio’s.
A complete list of all GM RPO codes can be found at
http://tinyurl.com/eycv GT4 Axle Rear 3.73 Ratio GT5 Axle Rear 4.10 Ratio (DUP With GT8) GU4 Axle Rear 3.08 Ratio G65 Level Control Manual, Self-Adjusting G69 Level Control Auto, Air, HD G80 Axle Positraction Limited Slip HMc
Response:
Yup
What is their failure mode? “along with the G80″ you poor soul Wonderful, yet another G(enerally) M(ediocre) component that eats its young on a regular basis? VLJ
Response:
Total absolutely total, devastating destruction
Yup What is their failure mode? “along with the G80″ you poor soul Wonderful, yet another G(enerally) M(ediocre) component that eats its young on a regular basis? VLJ
Response:
Missed one, GU6 is 3.42. In the S-trucks anyway… A complete list of all GM RPO codes can be found at http://tinyurl.com/eycv GT4 Axle Rear 3.73 Ratio GT5 Axle Rear 4.10 Ratio (DUP With GT8) GU4 Axle Rear 3.08 Ratio G65 Level Control Manual, Self-Adjusting G69 Level Control Auto, Air, HD G80 Axle Positraction Limited Slip HMc
Response:
Has anyone gotten the entire listing .pdf file to come up at this site. I wanted to pull it up to save it and it just keeps coming up not found? I have some of the codes but wouldn’t mind a better listing. Thanks folks Steve W. A complete list of all GM RPO codes can be found at
http://tinyurl.com/eycv Posted via Newsfeeds.Com, Uncensored Usenet News http://www.newsfeeds.com – The #1 Newsgroup Service in the World! Over 80,000 Newsgroups – 16 Different Servers!
Response:
Same thing for me, I just cut and psted it into word and printed and saved.
Has anyone gotten the entire listing .pdf file to come up at this site. I wanted to pull it up to save it and it just keeps coming up not found? I have some of the codes but wouldn’t mind a better listing. Thanks folks Steve W. A complete list of all GM RPO codes can be found at http://tinyurl.com/eycv Posted via Newsfeeds.Com, Uncensored Usenet News http://www.newsfeeds.com – The #1 Newsgroup Service in the World! Over 80,000 Newsgroups – 16 Different Servers!
Response:
HI all, I was checking out the post “which rear end do I have” You guys have me curious now, I checked my VIN # and this website http://tinyurl.com/eycv , couldn’t find my rear end code in there, anyone help me out? GTE is the code I have in my VIN # K19 are the three #’s after GTE if that helps 99 Z71 4X4 Thanks!
Response:
HI all, I was checking out the post “which rear end do I have” You guys have me curious now, I checked my VIN # and this website http://tinyurl.com/eycv , couldn’t find my rear end code in there, anyone help me out? GTE is the code I have in my VIN # K19 are the three #’s after GTE if that helps 99 Z71 4X4
The codes at that web site are RPO codes, and not part of your VIN. Look in your glove compartment, you will find a sticker with a whole bunch of 3-letter/digit codes. Those are the RPO codes that represent all of the installed components of your vehicle. RPO stands for Regular Production Options. AFAIK, this link– http://tinyurl.com/fdw9 should be a 100+ page document in .pdf format that contains all of GM’s RPO codes. HMc
Response:
With your valve stem straight down, make a chaulk mark on you r driveshaft. Have someone drive truck straight ahead one tire rotation. Count number of turns of driveshaft until the valve stem is straight down again. If mark has gone around just over 4 times, it’s a 4.10. Three and three quarters turns, it’s a 3.73. Just under3 and one half turns, a 3.42. Just over 3 turns, a 3.08. Quicker than tryin to cipher a code!
Response:
I posted the same thing, but it did not show in the group??? john
With your valve stem straight down, make a chaulk mark on you r driveshaft. Have someone drive truck straight ahead one tire rotation. Count number of turns of driveshaft until the valve stem is straight down again. If mark has gone around just over 4 times, it’s a 4.10. Three and three quarters turns, it’s a 3.73. Just under3 and one half turns, a 3.42. Just over 3 turns, a 3.08. Quicker than tryin to cipher a code!
Response:
“along with the G80″ you poor soul
GT5 in mine, along with the G80. My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Response:
?????
“along with the G80″ you poor soul GT5 in mine, along with the G80. My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Response:
The G80 is not what one would call ‘durable’ it classifies as a ‘locker’, but just barely
????? “along with the G80″ you poor soul GT5 in mine, along with the G80. My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Response:
“along with the G80″ you poor soul
Wonderful, yet another G(enerally) M(ediocre) component that eats its young on a regular basis? VLJ
Response:
yup
“along with the G80″ you poor soul Wonderful, yet another G(enerally) M(ediocre) component that eats its young on a regular basis? VLJ
Response:
GT5 — 4.10 gears — Pacifism – The theory that if they’d fed Jeffrey Dahmer enough human flesh, he’d have become a vegan.
GT5 in mine, along with the G80. My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Posted via Newsfeeds.Com, Uncensored Usenet News http://www.newsfeeds.com – The #1 Newsgroup Service in the World! Over 80,000 Newsgroups – 16 Different Servers!
Response:
GT5 in mine, along with the G80.
My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Response:
My 2003 has a 3.73 posI rear end and the code in the glovebox is GT4. I also had a 2000 with a 3.42 posI rear and the 3.42 gears were standard that year for an LS, standard cab, short bed with a 4.8 V-8. Good luck, Karl
Response:
GU6 — 3.42 rear gears G80 — Axle Positraction, AKA Limited slip Eaton rear end — Pacifism – The theory that if they’d fed Jeffrey Dahmer enough human flesh, he’d have become a vegan.
I also am wondering what I have. I have a 2001 GMC Jimmy, 4×4. I have 2 numbers that begin with G. But they are on a white sticker in the glove box. GU6 G80 Thanks in advanced. Take the VIN to a dealer, they should be able to print an options list for you. If they won’t, find the yellow sticker in the glovebox and post the 3-digit code starting with G. I just bought a 2000 CHEVROLET K1500 SILVERADO through an auction and I was wondering which part of the VIN gives u that info and how do I translate it. part of the vin has a T4 in it I thought is was those 2 digits but not sure and if it is not sure which rear end it is. Thanks
Posted via Newsfeeds.Com, Uncensored Usenet News http://www.newsfeeds.com – The #1 Newsgroup Service in the World! Over 80,000 Newsgroups – 16 Different Servers!
Response:
Take the VIN to a dealer, they should be able to print an options list for you. If they won’t, find the yellow sticker in the glovebox and post the 3-digit code starting with G. I just bought a 2000 CHEVROLET K1500 SILVERADO through an auction and I was wondering which part of the VIN gives u that info and how do I translate it. part of the vin has a T4 in it I thought is was those 2 digits but not sure and if it is not sure which rear end it is. Thanks
Response:
I also am wondering what I have. I have a 2001 GMC Jimmy, 4×4. I have 2 numbers that begin with G. But they are on a white sticker in the glove box. GU6 G80 Thanks in advanced. Take the VIN to a dealer, they should be able to print an options list for you. If they won’t, find the yellow sticker in the glovebox and post the 3-digit code starting with G. I just bought a 2000 CHEVROLET K1500 SILVERADO through an auction and I was wondering which part of the VIN gives u that info and how do I translate it. part of the vin has a T4 in it I thought is was those 2 digits but not sure and if it is not sure which rear end it is. Thanks
Response:
I just bought a 2000 CHEVROLET K1500 SILVERADO through an auction and I was wondering which part of the VIN gives u that info and how do I translate it. part of the vin has a T4 in it I thought is was those 2 digits but not sure and if it is not sure which rear end it is. Thanks
