4×4 help
Question:
a couple months ago i had to replace the 4×4 actuator in my front axle. I have a 93 gmc seirra 1500 5.7 4 wheel was working fine. when i start the truck and shift into 4 hi it goes in . when i’m driving and shift back to two wheel,the indicator shows it went back to two wheel. After a minute or so you can here what sounds like the front axel spinning,or disengaging maybe, i then slow down,come to a stop and can hear the front axel slowing, slowing, then as it’s ready to stop ,you hear it banging into gear.( thats what it sounds like).the shift is still in 2 wheel and will not go back into 4wheel unless i turn off the ignition and engine. could it be a switch? hope someone can help.
Response:
– Hide quoted text — Show quoted text -> a couple months ago i had to replace the 4×4 actuator in my front axle. I > have a 93 gmc seirra 1500 5.7 > 4 wheel was working fine. > when i start the truck and shift into 4 hi it goes in . > when i’m driving and shift back to two wheel,the indicator shows it went > back to two wheel. > After a minute or so you can here what sounds like the front axel > spinning,or disengaging maybe, i then slow down,come to a stop and can hear > the front axel slowing, slowing, then as it’s ready to stop ,you hear it > banging into gear.( thats what it sounds like).the shift is still in 2 wheel > and will not go back into 4wheel unless i turn off the ignition and engine. > could it be a switch? hope someone can help. > i noticed that if i come to a complete stop,then shift into or outof 4
wheel drive,i have no problems. Now i’m thinking the problem is only shifting out of 4 wheel while moving(disengageing on the move). Any one help?
